2 - 15
OMNISCANNER User Guide
screen. (See Chapter 4 - Setup: Autotest Save Options for further
information.)
Press (Save) to save the settings and return to the SAVE
AUTOTEST Screen
7. Press ESC to return to the COAX TESTS screen without saving the
Autotest.
8. Press (Retest) to run continuous tests for the same coaxial
cable. The arrow located on the Retest button will be turning for the
duration of the test.
9. Press (Retest) once more to stop the continuous measure-
ment.
Note
Retest invalidates a coaxial Autotest. After using the retest feature,
the coaxial test must be repeated before results can be saved.
Viewing Coaxial Test Results
To view stored test result, press the (Results) function key
located in the Project screen. (See Chapter 7 - Results for more infor-
mation.)
To Next Page
Loading...
