OMNISCANNER User Guide
2 - 12
LINK ADAPTER to attach OMNIREMOTE to the Modular 8 jack.
Full Channel with Modular 8 Jacks
A Full Channel consists of all
the link elements from the hub
to the workstation.
For cables terminated with a
modular 8 plug, use the sup-
plied modular 8 CHANNEL
ADAPTER and attach
OMNISCANNER and OMNIREMOTE
to the channel patch cords.
Note
Best results for Category 6
channel tests will be obtained
when using OMNISCANNER
software version 4.0 or
higher, which utilizes AVC
(Adaptive Vector Cancellation
TM
).
For more information on the Permanent Link, the Basic Link, and the
Channel, please visit www.cabletesting.com.
CAT 6
CHANNEL
ADAPTER
USER CABLE
To Next Page
Loading...
