OMNISCANNER User Guide
1 - 14
Technical Support
If you have technical questions, you may contact Fluke Networks
Technical Support by phone, fax, or e-mail.
Note
Before calling Technical Support, please have your Serial number,
and the Hardware and Software Version numbers available. See
Product Versions section below.
Visit the Fluke Networks website at www.flukenetworks.com. Send
email to fluke-assist@flukenetworks.com.
To order accessories or get the location of the nearest Fluke Networks
distributor or service center, call:
• USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-363-5853
• Europe: +31-402-675-200
• Beijing: 86 (10) 6512-3435
• Japan: +81-3-3434-0181
• Singapore: +65-738-5655
• Anywhere in the world: +1-425-446-4519
For operating assistance in the USA, call 1-800-283-5853.
Product Versions
To display the software version #, the hardware
version #, the serial #, and the factory calibration
data for OMNISCANNER, press and hold the Backlight
key.
The CONTRAST screen will be displayed, which
contains information that you may need to provide
when calling Technical Support.
To display software, hardware and serial number information for
OMNIREMOTE, connect the units with the supplied Link Adapter and the
Channel -, Mod 8 -, or Set Reference Adapter and then press the
To Next Page
Loading...
