OMNISCANNER User Guide
4 - 16
Use the è to advance to the Date: field. Press ENTER to change the
date format. DD is the day setting, MM is the month setting, YY is the
year setting. Use the éê keys to highlight the desired format and
press ENTER to select it as the default date format.
Use the è to advance to the Decimal Separator: field and switch the
decimal symbol from , (comma) to . (period). Use the éê keys to
highlight the desired symbol and press ENTER once more to select it as
the default separator.
Press to save all settings and return to the SETUP screen.
Label Printer
Select Label Printer to display the LABEL PRINTER screen.
The label printer name is displayed.
Press ENTER to turn the Auto Print feature on or
off. Select YES if you want OMNISCANNER to
automatically print a label after the Autotest has
been saved. Select NO if you want to manually
initiate the print process. Press ENTER when done.
Use the è to advance to the Font Size: field and
press ENTER. Labels can be printed with small or
large fonts. Select Small or Large depending on
your requirements. Press ENTER when done.
Note
The font size is proportional to the label size. A large font printed on
a small label could appear smaller than a small font on a bigger
label.
Use the è to advance to the Copies: field. Use the éê keys to change
the number of labels you want to print for a specific circuit ID. Press
ENTER when done.
Press to save all settings and return to the SETUP screen.
To Next Page
Loading...
