5 - 3
OMNISCANNER User Guide
General Information
Most test result screens have a retest feature for diagnostic purposes.
Press (Retest) to run continuous tests for the same cable.
Press (Retest) once more to stop the continuous measurement.
OMNISCANNER will display the last measured data.
Tests that require the use of OMNIREMOTE will have small icons in the
upper right corner of the titlebar indicating whether the information
on the screen is pertinent for OMNISCANNER or OMNIREMOTE.
Toggle between the screens by pressing to open the screen that
contains the information for OMNISCANNER, and to display the
information for OMNIREMOTE.
Note
The PASS/FAIL criteria are based on the Autotest currently selected in
the Project screen.
Several measurements will display results in a graph format. When a
graph can be displayed, the (Graph) function key is available.
Press (Graph) to display test results for the highlighted pair or
To Next Page
Loading...
