1 - 7
OMNISCANNER User Guide
OMNIREMOTE’s LED Indicators
LED Color Description
PASS Green Overall Autotest
Result is PASS
Status Green (flashing) OMNIREMOTE is
ready
for testing
Green (consistent) OMNIREMOTE is active
FAIL Red Overall Autotest
Result is FAIL
Circuit Orange Hazard condition is
Guard detected. LED will
be lit in 5 second
intervals until the
hazard condition
disappears.
REMOVE CABLE FROM HAZARDOUS SOURCE!
Charge Green OMNIREMOTE is
inactive, the AC
adapter is present,
and the battery pack
is being charged
Green (flashing) OMNIREMOTE battery
is fully charged
Red (flashing) OMNIREMOTE battery
is low
OMNIREMOTE Keys
ON/OFF
When turned on OMNIREMOTE will blink the LEDs.
λλ
λλ
λ (Lambda)
When OMNIFIBER is attached to OMNIREMOTE, the remote unit can be
used as a light source. With the OMNIFIBER adapter attached, press the
λλ
λλ
λ
key to activate the light source and provide continuous or modulated
light at 850, 1300, 1310 or 1550 nm. The green LED of the appropriate
To Next Page
Loading...
