4 - 3
OMNISCANNER User Guide
Press ESC to return to the SETUP screen.
Autotests
Select Autotests to display the AUTOTESTS screen. It contains a list of
standard Autotest specifications supported by OMNISCANNER. Standards
are grouped by TIA, ISO, VENDOR, OMNI, IEEE, ATM, and AS/NZ.
If there are Autotest specifications in a folder, it will appear full ,
otherwise it will be empty .
Highlight a folder containing items and press
ENTER to display the list of Autotests contained in
that folder.
Use the é or ê arrow key to highlight a specific
Autotest.
Copper tests are marked with a twisted pair
icon.
Fiber optic tests are marked with a fiber icon.
Press (Set Default) to select it as the
Autotest to run.
Press (Detail) to review the Autotest’s limits.
Viewing Details for Copper and Fiber Autotests
For twisted pair cabling the Autotest Detail screen consists of four
pages.
Use the and function keys to browse
through the pages.
The screen titles show the standard being used to
set the limits (e.g. Cat 6 Link).
The first page displays the Configuration of the
Autotest (Basic Link, Channel, or Permanent Link).
To Next Page
Loading...
