7 - 5
OMNISCANNER User Guide
Results stored on a MultiMediaCard
OMNISCANNER2 allows you to view results that are stored on the MMC.
Internally stored results are identified by a light Project folder.
Results stored on MMC are identified by a black Project folder.
Viewing is accomplished as described above.
When a MultiMediaCard is inserted, OMNISCANNER2 will allow you to
copy results to the portable card.
To copy the test result(s) contained in one
project to the MMC, highlight the appropriate
Project folder in the RESULTS screen and
then press (Copy Project to MMC). This
function is available only for Projects in the
internal flash (light Project folder).
To copy all internal Projects that are listed in the
RESULTS screen, press (Copy Results to MMC).
To Next Page
Loading...
