2 - 7
OMNISCANNER User Guide
unselect the graphs to be saved. (See Chapter
4 - Setup: Autotest Save Options for more
information.)
Press (Save) to save the settings and
return to the SAVE AUTOTEST Screen
7. The SAVE AUTOTEST screen’s save function
key indicates the selected Save Option.
Press (Save) to save the test results to
OMNISCANNER’s internal memory.
Press (Save with Graphs) to save the
test results with their graphs to OMNISCANNER’s
internal memory.
Note
Saving graphs will reduce the number of
Autotests that can be stored.
Press (Save to MMC) to save the test results to the
MultiMediaCard. (OMNISCANNER2 only.)
Press (Save with Graphs to MMC) to save the test results with
their graphs to the MultiMediaCard. (OMNISCANNER2 only.)
Note
Saving graphs will reduce the number of Autotests that can be
stored.
8. Press ESC to return to the Autotest screen without saving the
Autotest.
9. To run the next Autotest press the key.
Viewing Twisted Pair Autotest Results
This viewing option is only available immediately after the Autotest
was performed.
To Next Page
Loading...
