1 - 13
OMNISCANNER User Guide
Editing Alphanumeric Fields
To start the editing procedure for fields that contain alphabetic and
numeric characters use the alphanumeric keypad.
1. Use the é or ê arrow keys to move the cursor
to the field to be edited. The entire field will be
highlighted in black.
2. Press ENTER. Notice that the field is now
highlighted in white and the main screen in the
background turns gray to indicate that the edit
mode has been launched. The first letter in the
field is highlighted in black.
3. Press any numerical key on your keypad to display a small drop-
down list containing letters to choose from. Example: Press 8 to choose
t, u, v or the number 8.
Note
Alphabetic and special characters are printed above each numbered
key on the keypad. For example, ABC is printed above the 2 key.
4. Use the é or ê arrow key to move to the appropriate character, or
simply press 8 on your keypad repeatedly until the appropriate letter
or number appears in the highlighted field. Press the
A/a
key to toggle
between uppercase and lowercase letters.
5. Press the è to close the drop-down list and highlight the next letter
to be edited. Notice that OMNISCANNER does not overwrite existing
characters. To delete single characters use the function key. To
clear an entire field use the function key.
6. Press ENTER to accept the field and exit the edit mode.
To Next Page
Loading...
