Maintenance and care
109
Inserting new print heads
The full functioning of the PostBase One
franking system at the time of delivery can
only be guaranteed when using original
Francotyp-Postalia print heads.
Caution! Insert the print heads only after
they have adapted to the ambient tempera-
ture of the franking machine (e.g. after stor-
age in the basement or after transport in a
cold vehicle). Else, no correct calibration can
be performed.
• Unpack the new print heads. Do not
remove the nozzle protection yet.
• Shake each print head vigorously six
times. Pigments, which may have settled,
immingle optimally that way.
• Remove the sticker.
To Next Page
Loading...
