PostBase One Franking System
156
You need an original sealing liquid bottle and
the suction hose, which came as an acces-
sory with the sealer.
• Screw the suction hose onto the empty
original bottle.
• To drain the sealant tank: Slightly com-
press the bottle, immerse its suction hose
in the tank, then loosen your grip of the bot-
tle. Repeat this procedure until the sealant
tank is empty.
• Re-insert the plug into the filler hole of the
sealant tank.
• Close the lid and gently snap it in its lock.
To Next Page
Loading...
