Appendix – Moving the PostBase One to another location
157
Remove the hand feed tray
When using the original packaging for trans-
port, you have to remove the hand feed tray.
• Push the hand feed tray forward to release
it from the locking device.
• Pull the hand feed tray to the left and away
from the franking machine.
Remove the letter catch tray from the franking machine
(PostBase One without
Sealer / Power Sealer)
• Pull out both catch brackets.
• Slightly lift the franking machine on its right
side and remove the envelope slide to the
right.
To Next Page
Loading...
