PostBase One Franking System
158
Remove the power sealer and letter catch tray (PostBase One with Sealer / Power Sealer)
• Pull out both catch brackets.
• Remove the connection cable of the power
sealer from the franking machine: Unscrew
and carefully pull off the plug.
Warning: Mind Your Hands! Be very careful
when handling the power sealer. As a conse-
quence of its construction design, the power
sealer has very sharp edges that might hurt
you.
• Slightly lift the power sealer and remove it
to the right.
• The envelope slide, which is secured to the
power sealer with two hooks, can now be
easily separated from the power sealer.
To Next Page
Loading...
