FP PostBase One - Page 160

PostBase One Franking System
160
On the dynamic scale (back cover) • Remove the connection cable of the
sealer / feeder: Unscrew and carefully pull
off the plug.
• Pull out power cable.
On the sealer (back cover) • Remove the power supply unit.
• Remove the connection cable of the
feeder: Unscrew and carefully pull off the
plug.
On the feeder (back cover) • Pull out power cable.
• Remove FSCP plug (termination plug):
Unscrew and carefully pull off the FSCP
plug.
Separate the components of the franking system
• Slightly lift the franking machine and move
it to the right.
• Slightly lift the dynamic scale and move it
to the right.
• Slightly lift the sealer and move it to the
right.
Franking machine
Housing
connector