Fugro 8200HP - Table 2: Position Types

OmniSTAR 8200HP User Manual
Issue 1.07, 10/2008
15
EASAT: The receiver is using differential corrections broadcast by the
EASAT satellite.
S
/
N
09: The signal to noise ratio of the DGPS signal. Signal to noise
values below 4 indicate an unusable signal, signal to noise values
between 4 and 8 indicate a fair signal strength and signal to noise
values higher than 8 indicate an excellent signal strength. This
field will show ‘Srch’ when the selected DGPS satellite is not yet
tracked or ‘Trck’ when the selected satellite can be tracked but the
receiver has not yet started to collect data from the satellite.
Display Description
SRCH Searching for satellites
TRCK Tracking satellites
G|2D Outputting 2-dimensional autonomous positions
G|3D Outputting 3-dimensional autonomous positions
D|2D Outputting 2-dimensional differential positions
D|3D Outputting 3-dimensional differential positions
x|3D Outputting unconverged OmniSTAR XP differential positions
X|3D Outputting converged OmniSTAR XP differential positions
h|3D Outputting unconverged OmniSTAR HP differential positions
H|3D Outputting converged OmniSTAR HP differential positions
Table 2: Position types