Fugro 8200HP - Figure 49: Receiver Options: Everest Multipath Rejection; Figure 50: Receiver Options: Modem Control; Figure 51: Receiver Options: D&E Sub; Figure 52: Receiver Options: TNL Sub

OmniSTAR 8200HP User Manual
Issue 1.07, 10/2008
32
Figure 49: Receiver Options: Everest Multipath Rejection
The Everest MPR screen shows whether the Everest Multipath Rejection
technology is implemented in the receiver.
Figure 50: Receiver Options: Modem Control
The Modem Control screen indicates whether or not one of the communication
ports has been configured to use the RTS/CTS signals in communication with
a connected device. Default, RTS and CTS are not used on either of the
communication ports.
Figure 51: Receiver Options: D&E Sub
Legacy screen , currently not used anymore
Figure 52: Receiver Options: TNL Sub
Currently not used anymore
Figure 53: Receiver Options: Carrier Phase