Fuji Electric FRENIC MEGA G2 Series - 5.1 Function Codes Overview

5.1 Function Codes Overview
5-1
FUNCTION CODES
Chap 5
5.1 Function Codes Overview
Function codes are used for selecting various functions of FRENIC-MEGA.
Function codes comprise 3 digits or 4 digits of alphanumeric character.
The first digit categorizes the group of function code alphabetically and the subsequent 2 or 3 digits identify each
code within the group by number.
Function code comprises 14 groups:
Fundamental functions (F codes),
Terminal functions (E codes),
Control codes (C codes),
Motor 1 parameters (P codes),
High-level functions (H codes),
Motor 2 parameters (A codes),
Motor 3 parameters (b codes),
Motor 4 parameters (r codes),
Application function 1 (J codes),
Application function 2 (d codes),
Customizable logic (U codes),
Link functions (y codes),
Option function (o codes),
and Keypad functions (K codes).
The function of each function code is determined according to the data to be set. The following descriptions are for
supplementary explanation of function code table. Refer to instruction manual of each option to find the details of
the option function (o code).