Fuji Electric FRENIC MEGA G2 Series - Page 209

5.2 Function Code Tables
5-25
FUNCTION CODES
Chap 5
Function
code
Name
Control method and Data setting range
Change when
running
Data copying
Factory
default
Related page
H197
User password 1
(Selection of protective
operation)
0: All function codes are disclosed, but the change is not allowed.
1: Only the function code for quick setup can be disclosed/changed.
2: Only the function code for customize logic setting is not disclosed/not
changed.
Y
Y
0
5-252
H198
User password 1
(Setting/check)
0000 to FFFF (in hexadecimal)
Y
N
0
H199
User password protection valid
0: Disable
1: Protected
Y
N
0
*9: This is a function code for adjustment by the manufacturer. Do not access these function codes.
*12: Y only when P30 = 0