5.3 Description of Function Codes 5.3.1 F codes (Fundamental functions)
Torque limiter (Applicable quadrant) (H75)
The settings for each quadrant (forward rotation drive/braking, reverse rotation drive/braking) for which torque limiter
A and B are enabled can be selected from “Drive/braking torque limiter”, “4 identical quadrants torque limiter”, and
“Upper limit/lower limit torque limiter” shown below.
Limiting is applied by separating torque limiting when driving (torque limiter A) and
torque limiting when braking (torque limiter B) for both forward rotation and reverse
rotation.
Limiting is applied with the same limiting value (torque limiter A) for both
forward/reverse rotation and driving/braking.
To Next Page
Loading...
