Fuji Electric FRENIC MEGA G2 Series - Page 399

5.3 Description of Function Codes 5.3.5 H codes (High performance functions)
5-215
FUNCTION CODES
Chap 5
FUNCTION
CODES
F Codes
E Codes
C Codes
P Codes
H Codes
A Codes
b Codes
r Codes
J Codes
d Codes
U Codes
y Codes
K Codes
The motor constant initialization relationship is shown in the following diagram. For motor 3 and 4, replace the A
codes below with b and r.
H03=1 全初期化(変更対象)
P02/A16,P99/A39
設定値で切り替え
P02 モータ容量 (変更対象)
P05-P23,P30,P40,P41,
P53-P56,P60-P65,P74,
P85,P87,P90
H03=2 モータ1定数
初期化(変更対象)
A16 モータ容量 (変更対象)
A19-A37, A53-A56
H03=3 モータ2定数
初期化(変更対象)
F42 制御選択 = 15,16
(変更対象)
F03,F04,
F05,F06
P03
定格電流
P99
モータ種別
A15
極数
H13
P02/A16
モータ容量
インバータ
銘板容量
P01
極数
F12,F15,F23,F26,
F40,F41,E50
d01-d04
d90
F11
A07
H46
F80 定格切替
(変更対象)
F09
トルクブースト
F44
A05
トルクブースト
A39
モータ種別
A17
定格電流
H03 = 1 Initialize all (items subject to change)
Capacity on
inverter
nameplate
P02/A16 Motor
capacity
F80 Rating switching
(items subject to
change)
P02 Motor capacity (items subject to change)
F42 Control selection = 15, 16
(items subject to change)
Motor type
Rated current
H03 = 2 Motor 1 constant
Initialization (items subject to change)
H03 = 3 Motor 2 constant
Initialization (items subject to change)
Torque boost
Torque boost
Number of
poles
Number of
poles
Rated current
Motor type
A16 Motor capacity (items subject to change)