Fuji Xerox DocuCentre-V C2263

Copy
104
Copy
3
1 Select [Paper Supply].
2 Select a paper tray to be used.
 Auto Select
Automatically determines the tray holding the appropriate paper, based on the document
size and the specified copy ratio.
Note
z
This cannot be selected together with [Auto%] under [Reduce/Enlarge].
 Trays 1 to 4
Allows you to directly select the desired tray.
Note
z
Trays 3 and 4 are optional for some models.
z
When the Envelope Tray (optional) is inserted into the slot for Tray 1, you can load envelopes in the tray. For
more information, refer to "Paper Supply (Selecting the Paper for Copying)" (P.113).
 Tray 5
Allows you to select the size of paper loaded in the bypass tray.