Registering/Deleting/Renaming Stored Programs
461
Stored Programming
8
0001 to 0045, while the buttons 46 to 54 are used for stored programs and they correspond to the
registered stored programs 1 to 9.
1 Select [Store].
2 Select a number to register a stored program.
z
Once a job is stored to a button, it cannot be overwritten.
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.84).
3 Set the feature you want to register.
z
The machine sounds an audible tone while a stored program is being registered.
z
Press the <Interrupt> button to cancel registration.
z
You can change the volume of the sound that notifies that a stored program is being registered. For information on the setting,
refer to "Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming Tone" in the Administrator Guide.
4 Press the <Start> or <Clear All> button.
z
If no name is entered for a registered stored program, the name becomes "(No Name)".
z
For information on how to name a registered stored program, refer to "Entering/Changing a Stored Program Name" (P.464)".
Notes and Restrictions on Registering Stored Programs
The following notes and restrictions apply when you register stored programs.
z
When registering a stored program to select a paper size or type loaded on the bypass
tray, register both the paper size and the paper type. If only the paper size or type is
registered, the stored program may not be called properly.
z
If any of the following operations is performed while a stored program is being
registered, the stored program may not be registered or may not work correctly.
- Removing or inserting a paper tray
- Loading or reloading paper in the bypass tray
z
If any of the following operations is performed after a stored program is registered, the
registered stored program may not be called properly.
- If the stored program has the Watermark feature and the default values of that
feature are changed.
To Next Page
Loading...
Need help?
General
