Scan
422
Scan
5
Split Send (Sending in Sections)
When using the E-mail service, and the size of the data to be attached is large, you can split
the data at page breaks or by a certain data size and then send the data.
z
For information on [Split Send], refer to "Tools" > "E-mail/Internet Fax Service Settings" > "E-mail Control" > "Split Send Method" in
the Administrator Guide.
1 Select [Split Send].
2 Select any option.
îš„ Split by Page
The data is split at page breaks.
z
[Split by Page] is available only when [File Format] on the [E-mail] screen is set to [PDF], [DocuWorks], or
[XPS]*, or when [File Format] is set to [TIFF] with [Single File for Each Page] check box not selected.
*: XPS stands for XML Paper Specification.
îš„ Split by Data Size
The data is split by a certain data size.
z
Select this option if your e-mail application supports message/partial.
File Name (Specifying a Name for the File to be Sent)
When using the E-mail, Scan to PC, Network Scanning, or Store & Send Link service, you can
specify a name for the file to be sent.
To Next Page
Loading...
Need help?
General
