Scan
368
Scan
5
Network Scanning
This section describes the procedure to select features on the [Network Scanning] screen.
On the [Network Scanning] screen, you can scan documents after specifying a file (job
template) saving scanning conditions, information on the forwarding destination server,
and others.
This feature creates job templates on a computer using CentreWare Internet Services.
Scanned data is converted to the format specified in a job template, and is automatically
sent to a server. The machine allows you to automatically retrieve job templates stored in a
server. The following describes features available on the [Network Scanning] tab.
z
If characters not supported by the machine are used in names or descriptions of job templates, the
characters will not be displayed or will be garbled on the screen. For information on characters available for
use, refer to "Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the Use of the Machine" in the
Administrator Guide.
z
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the internet. The communication fee shall be borne by you.
1 Select [Network Scanning] on the Services Home screen.
z
WSD stands for Web Services on Devices.
2 Select a job template, and then select a feature on the [Network Scanning] screen.
To Next Page
Loading...
Need help?
General
