Simple Copy
107
Copy
3
In that case, change a level from the five levels which is used for the machine to recognize color. For more
information, refer to "Tools" > "Common Service Settings" > "Image Quality Adjustment" > "Image Quality"
> "Output Color Recognition" in the Administrator Guide.
îš„ Color
Copies in full color.
îš„ Black & White
Copies in black and white regardless of the colors in the original document.
z
If the use of certain colors is not allowed, the available colors will be restricted. For more information, refer to
"Tools" > "Accounting" > "Create/View User Accounts" > "Service Access" in the Administrator Guide.
Lighten/Darken (Adjusting the Copy Density)
This feature allows you to select a copy-density level from seven levels.
1 Use [ ] and [ ] to set a density level.
2 Pages per Side (Copying Two Pages onto One Sheet)
This feature allows you to copy two pages of a document together onto one side of a single
sheet of paper.
When you select [2 Pages per Side], [Auto %] is automatically selected in [Reduce/Enlarge].
The machine automatically sets the copy ratio and makes copies of the images so that they
fit on the selected paper.
z
When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio), image loss may occur
depending on the image size of the document.
z
Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the tray containing A4
paper is selected. If no tray contains A4 paper, the machine selects a tray based on the [Auto Paper Off]
setting. For information on [Auto Paper Off], refer to "Tools" > "Copy Service Settings" > "Copy Control" >
"Auto Paper Off" in the Administrator Guide.
z
For information on how to copy four or eight pages of a document together onto one side of a single sheet of paper, refer to "Pages
per Side (Copying Multiple Pages onto One Sheet)" (P.124).
To Next Page
Loading...
Need help?
General
