Scan
314
Scan
5
Scanning Procedure
This section describes the basic scanning procedure.
"Step 1 Loading Documents" (P.314)
"Step 2 Selecting the Features" (P.317)
"Step 3 Starting the Scan Job" (P.321)
"Step 4 Confirming the Scan Job in Job Status" (P.323)
"Step 5 Saving the Scanned Data" (P.324)
Step 1 Loading Documents
The following two methods are available to load documents:
Document Feeder
z
Single sheet
z
Multiple sheets
Document Glass
z
Single sheet
z
Bound documents, such as books
z
Precautions for scanning from a computer
When you are away from the machine to operate a computer with the documents left on the machine, other
user may operate the machine and there is a risk of document loss and information leakage. Use a computer
which is as close to the machine as possible. When the scan process is complete, check that you have all pages
of the documents.
To Next Page
Loading...
