Copy
110
Copy
3
1 Specify a copy ratio. You can use the numeric keypad to specify a value, or [+] and [-] to
specify reduction/enlargement ratios directly.
100%
Copies at the same image size as the original document.
Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
z
This cannot be selected together with [Auto Select] under [Paper Supply].
Ratios (3rd and 4th buttons)
Displays preset copy ratios.
z
You can change the copy ratio associated with each button. For information on the settings, refer to "Tools" > "Copy Service
Settings" > "Preset Buttons" > "Reduce/Enlarge - Button 3 - 4" in the Administrator Guide.
More
Displays the [Reduce/Enlarge] screen on which you can set [Proportional %], [Independent
X - Y%], and [Calculator %].
z
For information on the settings on the [Reduce/Enlarge] screen, refer to "Reduce/Enlarge (Making Enlarged/Reduced Copies)"
(P.109).
When [Proportional %] is Selected
You can select a ratio from the standard copy ratios, or can enter a ratio directly.
1 Select a copy ratio, or specify a value.
To Next Page
Loading...
