Scan
352
Scan
5
îš„ Auto Detect
The color of the document is determined automatically; the machine scans in full color
when the document is colored, otherwise scans in monochrome.
z
When you select [Auto Detect], the available features on the [Advanced Settings] screen are the same as
when you select [Color] in [Color Scanning] for color documents, or the same as when you select [Black &
White] in [Color Scanning] for monochrome documents.
îš„ Color
Select this option to scan a color document.
îš„ Black & White
Scans a document in monochrome two tones. You can select the document type in
[Original Type].
z
[Black & White] is not selectable when [MRC High Compression] is set to [On] on the [File Format] screen.
îš„ Grayscale
Scans a document in grayscale. Adds shades to monochrome, creating intermediate tones
that change gradually. Suited to documents containing gradations that cannot be
reproduced with monochrome (2-color tone).
2 Sided Scanning (Scanning Both Sides of a Document)
You can scan a 1-sided or 2-sided document on one or both sides of paper.
By setting the binding style, both sides are scanned in the same orientation.
z
[2 Sided Scanning] is not displayed on the [E-mail] screen depending on the settings in the System
Administration mode. In that case, set [2 Sided Scanning] from the [Layout Adjustment] screen.
1 From the menu displayed by selecting [2 Sided Scanning], select any option.
îš„ 1 Sided
Select this option to scan only one side of the document.
îš„ 2 Sided (Head to Head)
Select this option when both sides of the 2-sided document are in the same orientation.
îš„ 2 Sided (Head to Toe)
Select this option when both sides of the 2-sided document are in opposite orientations.
To Next Page
Loading...
Need help?
General
