Copying Procedure
91
Copy
3
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 125 x
85 mm (Standard size: A5, A5 ) to 297 x 432 mm (Standard size: A3, 11 x 17").
The document feeder automatically detects standard size documents. For non-standard
size documents, enter the size on the [Original Size] screen.
z
The document feeder is optional for some models. For more information, contact our Customer Support
Center.
z
For information on document sizes that can be detected automatically and how to enter a non-standard document size, refer to
"Original Size (Specifying the Scan Size for the Document)" (P.139).
z
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the
System Administration mode. For information on [Paper Size Settings], refer to "Tools" > "Common Service
Settings" > "Other Settings" > "Paper Size Settings" in the Administrator Guide.
The document feeder accepts the following number of sheets.
z
To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted documents,
curled paper, or back carbon paper.
z
When Duplex Automatic Document Feeder B1-C is installed, the lightweight paper of 38 - 49 gsmcannot be
scanned 2 sided.
z
For information on how to copy mixed sized documents, refer to "Mixed Size Originals (Scanning Different Size Documents
Simultaneously)" (P.141).
1 Remove any paper clips and staples before loading a document.
2 Load the document face up (when the document is 2-sided, load the front side up) in the
center of the document feeder.
Document Type (Weight) Number of Sheets
Lightweight paper (38 - 49 gsm) 110 sheets
Plain paper (50 - 80 gsm) 110 sheets
Heavyweight paper (81 - 128 gsm) 75 sheets
To Next Page
Loading...
Need help?
General
