Fuji Xerox DocuCentre-V C2263

Stored Programming
464
Stored Programming
8
2 Select the number to be deleted.
Note
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.84).
3 Select [Delete].
 Delete
Deletes the stored program.
Note
z
Deleted stored programs cannot be restored.
 Cancel
Cancels deleting the stored program.
Entering/Changing a Stored Program Name
The following describes how to enter or change the name of a stored program.
Up to 36 characters are allowed for a stored program's name.
Reference
z
For information on how to enter characters, refer to "Entering Text" (P.87).
1 Select [Enter/Change Name].
2 Select the number to register or change a name.
Note
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.84).