Fuji Xerox DocuCentre-V C2263 User Manual

Calling a Stored Program
467
Stored Programming
8
4 After the stored program is called, select other features if necessary.
5 Press the <Start> button.
Calling a Stored Program for Build Job
You can call a stored program for Build Job on the [Copy] screen displayed while Build Job is
running.
Note
z
This feature may not be available depending on the model or your machine configuration. For information,
contact out Customer Support Center.
1 Select [Change Settings].
2 Select the [Job Assembly] tab.
3 Select [Stored Programming].
4 Select a number of a stored program containing the features you want to use.
Note
z
You can only select registered numbers.
z
After the stored program has been called, the machine sounds an audible tone. If a failure occurs, the
machine sounds a fault tone.
123
456
789
0
＃
C

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB