Product Overview
78
Product Overview
2
Screens and Buttons Displayed
You can register or change the services and buttons displayed on the touch screen. You can
customize the following screens:
z
The following screens and buttons may have been changed by the system administrator. Use the machine
according to the changes that have been made.
Setting the Initial Screen
You can set the screen displayed after switching the power on or exiting the Power Saver
mode.
Setting the Screen Displayed after Auto Clear
You can select [Last Selection Screen] or [Services Home] for the screen to be displayed
after Auto Clear.
Assigning Services to the Custom Buttons
You can assign services to the custom buttons on the control panel: Custom 1 to Custom 3.
By assigning frequently-used services to the custom buttons, you can switch to the services
without returning to the Services Home screen.
z
By default, "Copy" is assigned to the <Custom Button 1>, "Fax" is assigned to the <Custom Button 2>, and
"Review" is assigned to the <Custom Button 3>.
Customizing the Services Home screen
You can customize the layout of services and buttons on the Services Home screen that is
displayed when you press the <Services Home> button on the control panel.
z
For information on how to customize the Services Home screen, refer to "Before Using the Machine" > "Customizing the Control
Panel" > "Customizing the Button Layout" in the Administrator Guide.
24 IC Card Reader
(optional)
Used to authenticate a user using a smart card.
When you touch the smart card to the IC Card Reader, the
machine reads the user information registered on the smart
card and authenticates the user.
z
An optional component is required to use this feature. For
more information, contact our Customer Support Center.
z
When the machine is in the Power Saver mode, touching the
smart card to the IC Card Reader deactivates the Power Saver
mode. However, this operation does not deactivate the Sleep
mode. For more information, refer to "Exiting the Power Saver
Mode" (P.72).
25 Paper clip tray Used for placing paper clips and staples.
No. Component Function
To Next Page
Loading...
Need help?
General
