Fuji Xerox DocuCentre-V C2263

Registering/Deleting/Renaming Stored Programs
465
Stored Programming
8
3 Enter a name, and select [Save].
Assigning/Changing Icons for Stored Programs
The following describes how to assign or change an icon of a stored program.
You can select from 12 icons.
1 Select [Assign/Change Icon].
2 Select the number to assign or change an icon.
Note
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.84) .
3 Select an icon, and select [Save].
 No Icon
No icon is assigned to a registered stored program.
 Icon
Select an icon according to the content of the registered stored program.