Fuji Xerox DocuCentre-V C2263

Copy
172
Copy
3
background is printed as embossed or outline text depending on the option you select on
the [Watermark Effect] screen.
Note
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
1 Select any option.
 Off
Prints the text specified in [Stored Watermarks] as it is.
 Embossed
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
 Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
Reference
z
You can specify the size, density, and other settings for text to be printed with Watermark in the System Administration mode. For
more information, refer to "Tools" > "Common Service Settings" > "Watermark" in the Administrator Guide.
Folding (Outputting Bi-Folded)
This feature allows you to fold copies in half, or crease in half.
Important
z
When the Finisher-B1 is installed, do not remove output copies from the finisher tray until all the output
copies have been delivered.
Note
z
The supported paper orientation is only . Select the tray whose orientation is set to .
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
1 Select [Folding].