Fuji Xerox DocuCentre-V C2263 User Manual

Configuring/Starting Job Flow
443
Send from Folder
6
 E-mail Notification
You can receive the job results by e-mail.
Reference
z
For more information, refer to "Tools" > "Setup" > "Create Job Flow Sheet" > "Create New Job Flow Sheet" in the Administrator
Guide.
 Print
Files in a folder can be printed.
1 Select files on the [Folder - File List] screen.
2 Select [Job Flow Settings].
3 Select any option.
 Auto Start
This sets auto start of the job flow for files stored in the folder. The job flow automatically
starts when a file is stored.
 Start Current Job Flow
Select files in the folder, and then select this button to start the job flow linked to this folder.
Important
z
After executing the job flow, confirm the [Job Status] screen or print a Job History Report to check the result.
For information on the Job History Report, refer to "Tools" > "Common Service Settings" > "Reports" > "Job
History Report" in the Administrator Guide.

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB