Copy
114
Copy
3
1 Select a paper tray.
Auto Select
Automatically determines the tray holding the appropriate paper, based on the document
size and the specified copy ratio.
z
This cannot be selected together with [Auto%] under [Reduce/Enlarge].
Trays (2nd to 5th buttons)
Allows you to directly select the desired tray.
z
You can change the paper tray associated with each button on the [Copy] screen. For information on the settings, refer to "Tools" >
"Copy Service Settings" > "Preset Buttons" > "Paper Supply - Button 2 - 5" in the Administrator Guide.
More
Displays the [Paper Supply] screen.
z
Refer to "Paper Supply (Selecting the Paper for Copying)" (P.113).
Checking the Remaining Amount of Paper in a Tray
Checking the Remaining Amount of Paper in a Tray
[Paper Supply] Screen
This screen allows you to select a paper tray from all trays available on the machine.
:
Indicates that the remaining amount of paper is 25 to 100%.
:
Indicates that the remaining amount of paper is 25% or less.
:
Indicates that the tray has run out of paper, or no paper is loaded in the tray.
To Next Page
Loading...
