Fax
268
Fax
4
2 Select any option.
îš„ G3 Auto
Select this mode if the remote machine is G3 compatible. This mode is normally selected.
Depending on the reception capabilities of the remote machine, the machine automatically
switches modes in the following order: G3 Unique ECM → G3 Unique → ITU-T G3 ECM →
ITU-T G3.
îš„ Forced 4800 bps
Select this mode when transmitting over noisy or poor telephone lines, as can be the case
with overseas calls.
Also select this mode when transmitting over noisy or poor telephone lines domestically.
îš„ G4 Auto
This setting is applied to the transmission speed between the fax gateway and destination
fax for the Internet Fax.
About Forced 4800 bps
You can communicate with faxes overseas via telephone company exchanges, etc.
z
The international telephone networks are originally designed for voice communications. Noise that does not
really affect voice communications causes a problem with fax communications. It may result in the
deterioration of images quality, the inability to transmit a fax, or even terminate the transmission. Regardless
of whether transmission is successful, you are charged for the call once the line is connected. For information
on line trouble and call charges, contact your telephone company.
z
If you select [Forced 4800 bps], the transmission time may be longer because transmission is performed at
4800 bps or less to ensure transmission is successful.
1 Select [Starting Rate].
To Next Page
Loading...
Need help?
General
