z
Data stored in a USB memory device may be lost or damaged in the following cases. Make sure to back up
the data in the device before use.
z
When disconnecting/connecting the USB memory device by methods other than described in this guide.
z
When receiving the effect of electrical noise or an electrical discharge
z
When a fault or failure occurs during operation
z
If the USB memory device receives mechanical damage
z
We assume no responsibility for any direct and indirect damages arising from or caused by such data loss.
z
If you do not specify the file storage location, the scanned data is saved in the root directory.
Save in (Specifying a Storage Location in the USB Memory Device)
You can specify a file storage location in the USB memory device.
1 Select [Save in].
To Next Page
Loading...
