Job Assembly
185
Copy
3
1 Select any option.
îš„ Off
The next stack of documents is copied after the previous stack.
îš„ On
The next stack of documents is copied from Side 1 of a new sheet of paper.
îš„ Pages per Side - New Page
When [Pages per Side] is set, even if all documents are divided for every chapter before all
of them are assembled in the Pages per Side feature, the next stack of document is copied
from Side 2 of the paper.
[Segment Separators] Screen
This screen allows you to insert a sheet of paper as a separator in between each stack of
documents. You can specify the number of separators to insert in the range from 1 to 99 as
necessary.
z
You can specify different settings for each stack of documents. If you do not specify particular settings for
each stack of documents, the previously specified settings are applied.
1 Select any option.
îš„ No Separators
Does not insert any separators.
îš„ Blank Separators
Inserts blank separators.
If you select this option, load documents, and press the <Start> button, the blank
separators are inserted before the copies of the documents.
To Next Page
Loading...
Need help?
General
