Before Using the Machine
26
Before Using the Machine
1
Always lock the wheels of this product after installation. Otherwise, it may fall over or slide
and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji Xerox
supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in the following
environment:
z
Temperature: 10 - 32°C
z
Humidity: 15 - 85%
When the product is left in a chilly room and the room is rapidly warmed up by heater, dew
condensation may form inside the product and cause a partial deletion on printing.
To Next Page
Loading...
Need help?
General
