Before Using the Machine
28
Before Using the Machine
1
The power plug of this product has a ground fault interrupter. If current leakage occurs, the
ground fault interrupter automatically cuts off power circuit to prevent electric shock and a
fire accident. Check once a month if the ground fault interrupter works properly in
accordance with the following procedures:
1. Switch the power off.
z
When the Finisher B-1 (optional) is installed.
2. Make sure that the touch screen is blank and the <Power Saver> button does not light
up.
3. Open the front cover.
4.
Press the main power switch to the [ ] position to switch the main power off.
5. Press the <TEST> button on the power plug to turn off the ground fault interrupter.
Check if the power lamp turns off. If the lamp turns off, it means that the ground fault
interrupter circuit works properly.
To Next Page
Loading...
Need help?
General
