Fax
300
Fax
4
The last two digits of the initiating station address number registered at the relay station
z
Address number
An address number for the relay recipients registered at the relay station
The wildcard "*" can also be used.
z
You can register the above dialing format in an address number to send using the address number. For information on how to
register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
2 Select [+ Add] to perform Multiple Relay Broadcast.
z
You can specify up to 20 locations for relay recipients.
3 Press the <Start> button.
Manual Send (Transmitting with picking up the receiver or on-hook)
1 Select the [More Options] tab to display the [More Options] screen.
2 Pick up the telephone receiver, or select [On-hook (Manual Send/Receive)].
3 Select [Manual Send] from the drop-down menu.
4 Use the keyboard displayed on the touch screen to enter numbers in the following format.
z
You can specify up to 20 locations for relay recipients.
Relay station
telephone
number
Facsimile tone Beep! Password Relay
station
ID
Address
number
Beep!
To Next Page
Loading...
