Broadcast
305
Fax
4
F Code Method
When using the machine as the initiating station for performing Remote Relay Broadcast,
confirm the F Code and the password (if necessary) for the primary relay station.
z
When using the F Code method for Remote Relay Broadcast, the primary relay stations and secondary relay
stations must support our F Code method and the Relay Broadcast feature.
z
When performing Relay Broadcast with Fuji Xerox manufactured machines that can be used as both an
initiating station and a relay station, we recommend that you use the fax signal method.
1 Select the [Fax/Internet Fax Options] tab to display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F Code with the numeric keypad.
z
You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the primary relay station ID:
1: When the primary relay station IDs and address numbers are two digits
2: When the primary relay station IDs and address numbers are three digits
z
Print Directive
Relay
Broadcast
Print
Directive
Primary
Relay
Station ID
Address
Number
Address
Number
....
Up to 20 digits
To Next Page
Loading...
Need help?
General
