Scan
316
Scan
5
4 Open the document stopper.
Document Glass
The document glass supports a single sheet, a book, or other similar documents with sizes
from 15 x 15 mm to 297 x 432 mm (Standard size: A3, 11 x 17").
z
Always close the document cover after using the document glass.
The document glass automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
For information on document sizes that can be detected automatically and how to enter a
non-standard document size, refer to "Original Size (Specifying a Scan Size)" (P.413).
The standard document sizes that can be detected automatically depend on [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "Tools" > "Common Service Settings" > "Other Settings" > "Paper Size Settings" in the
Administrator Guide.
1 Open the document cover.
z
Ensure that the touch screen is active, and then load a document. Otherwise, the machine may not properly
detect the document size.
Do not apply excessive force to hold thick document on the document glass. It may
break the glass and cause injuries.
To Next Page
Loading...
Need help?
General
