Scan
322
Scan
5
1 Press the <Start> button.
z
If the document has been loaded in the document feeder, do not hold down the document while it is being
conveyed.
z
If a problem occurs, an error message appears on the touch screen. Solve the problem according to the
message.
z
You can set the next job during scanning.
îš„If you have more documents
If you have more documents to scan, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to scan the documents as a single set of
data.
Up to 100 pages can be stored.
z
When an optional component is installed in the machine, up to 999 paged can be stored.
z
If the number of pages scanned by the machine exceeds the maximum, the machine stops scanning. Follow
the message displayed on the screen, and either abort the operation or save the already-scanned data as a
single set of data.
z
For information on how to set the maximum number of pages stored for a scan document, refer to "Tools" > "Scan Service Settings"
> "Other Settings" > "Maximum Stored Pages" in the Administrator Guide.
2 While documents are being scanned, select [Next Original].
z
When using the document feeder, load the next document after the machine has finished scanning the first
document.
z
When [Next Original] is displayed on the screen shown on the right and no operation is performed for a
certain period of time, the machine automatically assumes that there are no more documents.
z
You can change the scan settings of the next document by selecting [Change Settings] that is displayed after
selecting [Next Original].
123
456
789
0
＃
C
To Next Page
Loading...
Need help?
General
