Printing and Deleting Stored Jobs
495
Job Status
10
z
Drag the slider to change the ratio of the image size.
îš„ Print Quantity
Specifies the number of print sets.
îš„ Output Color
Displays the output color of the document to be printed.
îš„ 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
z
When the booklet layout is set using a printer driver, [2 Sided Printing] is not displayed on the screen.
îš„ Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
z
This item is displayed when the booklet layout is set using a printer driver.
z
When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
îš„ Print
Prints the Secure Print job.
z
Refer to "When [Print] is Selected" (P.495).
When [Print] is Selected
1 Specify how to process the job after printing.
z
The screen as shown on the right does not appear if [Print Job Confirmation Screen] is set to [Disabled] in the
System Administration mode. If [Disabled] is selected, the machine automatically deletes the job after
printing without displaying the confirmation screen. For more information, refer to "Tools" > "Stored File
Settings" > "Print Job Confirmation Screen" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
