Maintenance
102
Maintenance
3
1
Pull up the knob on the document feeder top cover, and open the document feeder top
cover completely.
z
When you fully open the cover, it enters a fixed position. Open the cover gently.
2
While turning the rollers, wipe them with a soft cloth moistened with water.
z
Do not use cleaning agents other than water or neutral detergent.
z
Use a cloth firmly wrung to prevent water drops from falling into the machine. If water gets into the machine,
it may cause the machine to malfunction.
z
If you cannot remove dirt easily, gently wipe the rollers with a soft cloth moistened with a small amount of
neutral detergent.
3
Close the document feeder left cover until it clicks into place, and confirm that there is no
space between the near or far side of the cover and the document feeder.
To Next Page
Loading...
