Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Before Using the Machine
28
Before Using the Machine
1
Auto Start
Select the check box to automatically switch the Warmer mode to [On] when condensation
continued for a specific period of time.
Auto Stop
Select the check box to automatically switch the Warmer mode to [Off] after a specified
period of absence of condensation has elapsed.
Note
z
If the power is off at the time specified in [Start Time], the machine will not enter the Warmer mode.
z
While the Warmer mode is enabled, the machine will not enter the Sleep mode and prevents or reduces
condensation.
z
[Auto Start] allows you to automatically enable the Warmer mode when the machine detects condensation
in future years.
8 Select [Save].
9 Select [Close] repeatedly until the Services Home screen is displayed.
Note
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)