Paper and Other Media
70
Paper and Other Media
2
Changing the Paper Size
This section describes how to change the paper size for Trays 1 to 4.
Changing the Paper Size for Trays 1 to 4
The following describes how to change paper size in Trays 1 to 4.
z
Trays 2 to 4 are optional for some models.
z
The types of paper in Trays 1 to 4 are preset. There are 11 paper types: Plain paper, Bond paper, Recycled
paper, Heavyweight paper, Gloss paper, Labels, Custom paper 1 to 5, and normally, plain paper is set. When
changing to a different paper type, change the paper quality settings to match the type of paper to be
loaded so that you can maintain high quality printing. For more information on paper type settings, refer to
"Changing the Paper Settings" (P.72).
z
When loading non-standard size paper, you must register the paper size. For information on registering paper
sizes, refer to "Paper Tray Attributes" (P.158).
z
For more information on how to copy on non-standard size paper, refer to "3 Copy" > "Copy" > "Paper Supply (Selecting the Paper
for Copying)" in the User Guide. For more information on how to print on non-standard size paper, refer to the help of the print
driver.
1
Pull out the tray until it stops.
z
While the machine is processing a job, do not pull out the tray that is being used for a job.
z
To prevent paper jams or erroneous detection of loaded paper in a tray by the machine, do not add paper on
top of any remaining paper in the tray.
2
Remove any paper loaded in the tray.
z
When pulling out the paper tray, do it slowly. If pulled out with too much
force, the tray can hit and injure your knees.
To Next Page
Loading...
Need help?
General
